Learn how the physical properties of rubber effect compound selection.

Engineers and part designers need to select rubber materials that meet all of their application requirements. Elastomers such as silicones have inherent physical properties, but these properties can be enhanced through compounding.

During compound selection then, it’s important to understand a rubber’s physical properties and to know how each property is measured. This will help you to ask for and receive the compound that you really need. 

What are the physical properties of rubber?

These are the physical properties of rubber.

  • Hardness
  • Tensile Strength
  • Tensile Modulus
  • Elongation
  • Resilience
  • Compression Set
  • Tear Resistance
  • Abrasion Resistance
  • Specific Gravity

The following sections provide a high-level look at each physical property. Future articles in this series will examine each property in greater detail.

Hardness

Elastomers have an inherent hardness because of their chemical structure. This hardness can be modified, and the processed hardness then measured in terms of durometer (duro) on a Shore scale. For soft to medium-hard rubber, Shore A is used. At 40 duro, solid rubber profiles have the consistency of pencil erasers. At 90 duro, they’re hard like hockey pucks. Which hardness do you need?

Tensile Strength

Tensile strength (TS) is the amount of force that’s required to pull a rubber specimen apart until it breaks. Known also as ultimate tensile strength (UTS), TS is measured in either pounds per square inch (psi) or megapascals according to ASTM D412. For technical buyers and part designers, tensile strength matters because it represents a rubber’s point of failure caused by stretching.

Tensile Modulus

Tensile modulus (TM) sounds similar to tensile strength, but these two properties are not the same. TM is the force or stress that’s required to produce an elongation percentage or strain in a rubber sample. In general, harder rubber has a higher tensile modulus. Such rubber is more resilient, but also more resistant to extrusion, a process for manufacturing stock materials used in custom fabrication.

Elongation

Elongation is the percentage increase (strain) in the original length of a rubber sample where a tensile force (stress) is applied. Some elastomers stretch more than others. For example, natural rubber (NR) may stretch up to 700% before reaching its ultimate elongation, the moment the NR breaks. By contrast, fluoroelastomers may rupture at 300% elongation. How much do you need your rubber parts to stretch?

Resilience

Resilience or rebound refers to a rubber’s ability to regain its original shape and size after a temporary deformation, such as contact with a metal surface. Resilience is especially important in dynamic seals, components that create a barrier between moving and stationary surfaces. If your application requires weatherstripping between a door and a door frame, the compound’s resilience is important to consider.

Compression Set

Compression set is the amount by which an elastomer fails to return to its original thickness after a compressive load is released. When a rubber seal is compressed repeatedly over time, progressive stress relaxation occurs. In terms of the seal’s life, stress relaxation is like dying. Compression set is like death itself – the end result of a steady decline in sealing force. How long do you need your seal to last?

Tear Resistance

Tear resistance describes an elastomer’s resistance to the growth of a nick or cut when tension is applied. Also known as tear strength, this physical property is measured in either pound force per inch (lbf/in) or kilonewtons per meter (kN/m). If you need edge trim that will contact rough metal edges or sharp objects, consider tear resistance during compound selection.

Abrasion Resistance

Abrasion resistance describes a rubber’s resistance to being worn away from rubbing or scraping. In industrial applications, abrasion-resistant rubber is used with conveyor belts that move coal and in pumps that handle slurries. Material loss due to abrasion can be measured with various instruments according to tests such as ASTM D394.

Specific Gravity

Specific gravity is the ratio of the weight of a material to the weight of an equal volume of water at a specified temperature. For chemists, it provides a way to identify compounds. For technical buyers and part designers, it’s important to know that rubber with a low specific gravity offers more square inches per pound of stock. Rubber with a higher specific gravity provides advantages in molding consistency.

Do you need custom seals? Learn more about the physical properties of rubber.

Do you have questions about the physical properties of rubber? Contact Elasto Proxy for more information, and enjoy the short video below that accompanies this article.

Download the Elasto Proxy catalogue. It is FREE!

Discover more about Elasto Proxy’s rubber sealing and insulation products.

Elasto Proxy Catalogue